wood-lathe-lathing

Safety Hacks When Using a Wood Lathe

After getting your wood-turning machine from https://healthyhandyman.com/best-wood-lathe-guide/, it’s time to know the safety hacks that can save you a lot of time and money.

Machine Protection

Get rid of adjusting keys and wrenches.

Double check if all the adjusting keys and tools that need to be removed are away or far from the lathe before you turn on your lathe. Here’s a tip for you: spin the lathe using your hands before you switch the machine on. This easy hack can save you the trouble of dealing with a lathe issue later on.

Secure the workpiece.

wood-lathe-mini

Ensure that the workpiece is secured to your wood lathe. Inspect every single aspect you have to inspect. Examine thoroughly. This goes back to your training and understanding of how hazardous a wood lathe can be. Evaluation your stock’s diameter too. Run the lathe at a suggested RPM. Don’t go beyond. However, if your wood lathe features a variable speed option, always start at a low RPM and then speed up as the workpiece progresses. Everything—from the chucks and tailstock to the tool rest—must be tight on the lathe. If your stock has lots of knots or cracks, don’t use it. It will only damage your wood lathe.

Check the turning tools.

From time to time, you should inspect your turning tools. Can your chisels still perform efficiently? Do they need replacements? Remember that they are forced to deal with significant amount of forces over time. Check the handles and see if they’re still in a favorable condition. If there are cracks, replace the handle or let the chisel retire.

Inspect the cords.

Grizzly-H8259You should occasionally examine the cords supplying your wood lathe as well. Check whether the wires have no wears or exposed conductors. Doing this examination periodically will save you money for replacements and repairs someday. If you notice something wrong with the cords, repair them at once. Don’t forget to check if you’re using extension cords with sufficient current capacity.

Sharpen the tools.

Your wood lathing tools should always be sharp. Working with dull tools isn’t safe and recommended as they will only lessen your chances of a successful wood-turning operation.

Head Protection

  • Before working with your wood lathe, wear a dust mask.
  • Wear safety glasses to protect your eyes or a face shield to keep your entire face safe.
  • Ear muffs or ear plugs will protect your ears. Regular exposure to loud noise can ultimately decrease your hearing or create ringing in the ears.
  • If you have long hair, ensure that’s it’s tied back.

Upper Body Protection

  • wood-lathe-lathingIf you’re wearing long sleeves, keep them rolled up.
  • Do not wear loose clothes.
  • Don’t wear jewelry. They might get caught up in the wood lathe.
  • Watch your hands and fingers. Know all the potential pinch points. The largest one would probably be the one between the tool rest and the workpiece.

Lower Body Protection

  • Don’t wear shorts. Wear pants or wear an overall instead.
  • Wear durable boots or shoes with non-slip soles.

 

Lastly, keep your work area neat and clean. A working space filled with clutter will cause accidents and reduce efficiency.